+- Maxxd.com Forums (http://www.maxxd.com)
+-- Forum: Member Forums (/forumdisplay.php?fid=32)
+--- Forum: Maxxd.com Project Cars (/forumdisplay.php?fid=12)
+--- Thread: *MAXXD* Olstars 1989 Volkswagen Caddy (/showthread.php?tid=856)
RE: *Member* Olstars 1989 Volkswagen Caddy - Newth - 08-10-2008 02:12 AM
Quote of the day (well night)
olstar Wrote:Dude, stop laughing at my car!
hahahahahaha
sorry Ol.
RE: *Member* Olstars 1989 Volkswagen Caddy - olstar - 10-10-2008 06:42 PM
hahaha you bastard!
newth kept laughing at my car all night cos of how bodged the wiring was
ITS NOT MY FAULT!
I bought it like that!!
Anyway, newth decided it would be a good idea to lable up and remove all the wiring from the pickup, instead of figure out where the stray wires went (there were a LOT of stry wires!!)
what we found was that there was two wiring looms lobbed together!
whats basically happened, is the guy who had it before me has put a mk2 golf engine in it, but instead of removing the old mk1 wiring loom and making the mk2 one run everything, he las left the old wiring in and left that running the lights etc, and there is another loom just for the engine!
so we have started stripping the looms, removing anything that isnt labled up, and then making one loom out of two
[attachment=366]
pile of wires removed! two wiring looms
[attachment=367]
initial shit removed like the heatshrink/wrap from the looms and stray wires
[attachment=368]
the two looms stripped and labled, now we need to remove anything else stray and fit back into the car, making sure we do a good job of runnning the cables so it doesnt look a mess!
Hopefully tonight as long as nothing crops up i should be taking the truck to Stu's for some well needed work;
Exhaust re-fit
Rear shocks swapped
Rear arches fixed
Paint job!!!!
RE: *Member* Olstars 1989 Volkswagen Caddy - olstar - 13-10-2008 01:34 PM
Right, a very busy weekend for the caddy!
Got it to stu's, we chopped out the rear arches and re-did them - i say WE, i mean STU
Stu made me a new exhaust too as we couldnt get the existing one to sit right..
We fitted new rear shocks (thanks dubmodder, they cleaned up to almost new!!)
We fitted the rear roll pan and painted it (roughly)
We sealed the box and painted it satin black..
Doesnt sound a lot, but it took all weekend and the pickup looks a lot better for it!
Caddy is back home, and next on the list is to re-paint most of it after a bit of a sanding session, refit the wiring looms and dash etc and get the bitch on the road!
I Badly need another compressor though, so gotta get £100 put to one side soon!
Pics to come later!
RE: *Member* Olstars 1989 Volkswagen Caddy - Dubmodder - 13-10-2008 01:36 PM
Compressor for airride or spraying?
If its spraying you can borrow mine.
RE: *Member* Olstars 1989 Volkswagen Caddy - olstar - 13-10-2008 04:34 PM
Airride, mine is under too much strain, needs cutting some slack
EDIT - were spraying it with rattle cans 8)
RE: *Member* Olstars 1989 Volkswagen Caddy - Newth - 14-10-2008 01:14 AM
dude, i think i need you to drop the wiring loom off at my house so i can fiddle with it when i get a spare half hour every so often. that possible?
RE: *Member* Olstars 1989 Volkswagen Caddy - Saint AAI - 14-10-2008 08:18 AM
Where these pics then?? Sounds like its coming together.
RE: *Member* Olstars 1989 Volkswagen Caddy - olstar - 14-10-2008 12:13 PM
I havent been at home when its been light enough to take pics, i promise ill get them later!
Newth - yes thats fine mate, might be the best idea.
I really need to get it into a garage soon so i can finish painting it!
RE: *Member* Olstars 1989 Volkswagen Caddy - Newth - 14-10-2008 01:56 PM
can you pop it down wednesday night? might even have a hour free then to attack it.
RE: *Member* Olstars 1989 Volkswagen Caddy - davemaxxd - 14-10-2008 02:32 PM
Yes he can and yes he will
I'll kick him up the ass !